1、Familiar with the working process of this position, abide by the general cutting machine safety operation rules, familiar with the structure, performance and adjustment of equipment, daily maintenance and maintenance of equipment and other tasks, have a good sense of responsibility and quality awareness.
2、In the process of programming, reasonable typesetting, saving materials, the maximum reduction of waste.
3、Before starting the machine, wear good labor protection products according to the regulations, check the cleanliness of the laser cutting machine's focusing mirror, start the laser according to the procedures, keep the laser, bed and the surrounding site clean and orderly, the workpiece, plate and waste stacked according to the regulations; When opening the cylinder, the operator should stand on the side of the nozzle of the cylinder. It is forbidden to expose the cylinder to sunlight or close to the heat source.
4、After starting the machine, first run the program to check whether the machine operation is normal, so as to avoid the cutting machine out of the effective travel range; When the processing is abnormal, the machine should stop immediately and troubleshoot in time. During the operation, it is strictly prohibited to enter the work area.
5、After completion of the operation, turn off the power supply, close the air valve, clean up the work site.
6、Carefully fill in the daily production record, and do a good job of 5S work.
7、The internal maintenance of the laser, to comply with the high voltage safety procedures, do not overhaul the laser alone, turn off the high voltage key switch, in order to lock the high voltage, and then use the high voltage bar to discharge the high voltage capacitor.
8、Put the fire extinguisher in the accessible place, do not process is to turn off the laser, do not place paper, cloth or other flammable articles in the unprotected laser beam attachment.
9.Finish other temporary work assigned by leader.